MACHINE YOUR FUTURE

KL 435

  • Max. turning diameter: 550 mm
  • Max. turning length: 1 100 mm
  • Main spindle output S1: 22 kW

 

KL435-open

  • Modular machine concept
  • High rigidity of the machine skeleton
  • Tailstock with a separate rotary bushing for using a fixed
    point (rigid mounting)
  • Large stroke of Y-axis
  • Full C-axis
  • High dynamics and rapid feed of individual feed axes
  • High torque on the main spindle
  • Components spreading heat and noise placed at the rear of
    the machine
  • Hydraulic unit with proportional valves – setting the clamping
    pressure at the chuck and the tailstock quill on the machine
    control panel
  • Setting the chuck jaw stroke on the machine’s control panel
  • Machine control panel Siemens Sinumerik 828D

 

    A2 - 8 A2 - 11
TECHNICAL DATA   KL 435 KL 435 MC KL 435 Y KL 435 KL 435 MC KL 435 Y
Working space              
Swing diameter over bed mm 700 700 700 700 700  700
Swing dia over cross carriage mm 470 470 480 * 470 470  480 *
Max. turning length mm 1 100 1 100 1 100 1 100 1 100  1 100
Max. turning diameter - Upper turret mm 550 550 550 550 550  550
Max. bar capacity - spindle with belt drive mm 86 86 86 95 95  95
Axis travels              
X1/Z1 Axes mm 345 / 1 225 345 / 1 225 345 / 1 225 345 / 1 225 345 / 1 225  345 / 1 225
Y Axis mm            
Rapid traverse              
X1/Z1 Axes min-1  30  30  30  30  30  30
Y Axis min-1  - - 25 - - 25
Hlavní vřeteno              
Max. speed min-1  3 800  3 800  3 800  3 800  3 800  3 800
Max. speed C Axis min-1    42  42    42  42
Max. torque C Axis S1 / S3-40% Nm    420 / 490  420 / 490    420 / 490  420 / 490
Upper tool turret              
Number of positions  - 12 12 12 12 12 12
Hole dia. VDI mm  50 50 50 50 50 50
Max. speed of tool spindle min-1    4 000**  4 000**    4 000**  4 000**
Tailstock              
Sleeve taper - MORSE    5  5  5  5  5  5
Sleeve stroke   160 160 160 160 160 160
Sleeve dia    150  150  150  150  150  150
Spindle motor              
Main spindle Output S1/S6 - 40% kW 17 / 25,5 17 / 25,5 17 / 25,5 22 / 33 22 / 33 22 / 33
Main spindle Max. torque S1/S6 - 40% Nm 1 178 / 1 771 1 178 / 1 771 1 178 / 1 771 1 718 / 2 252 1 718 / 2 252 1 718 / 2 252
Tool spindle motor              
Output S1/S3 – 40% kW   8,2 / 15,4 8,2 / 15,4   8,2 / 15,4 8,2 / 15,4
Max. torque S1/S3 – 40% Nm   48 / 67 48 / 67   48 / 67 48 / 67
Machine dimensions
and weight
             
Length × width × height mm  4035 × 2591 × 2251 4035 × 2591 × 2251  4035 × 2591 × 2251  4035 × 2591 × 2251  4035 × 2591 × 2251  4035 × 2591 × 2251
Weight kg  8300  8500  8700  8300  8500  8700

 

*1) The value is valid for Y=0
*2) constantly n=2000 min-1 (loadless) max. 60 min n=4000 min-1 (loadless)

  • Chucks A8: SMW Autoblok BH-D 315, BH-D 400, BB-D 250, KNCS-N 325-104
  • Automatic electric sliding of the working space cover
  • Collet clamping
  • Oil mist and aerosol extraction from the tool working space
  • Spindle arrest
  • Removable tool probe
  • Manual working space rinsing
  • Removable steady on a common guide with the machine tailstock (clamping range 25-165 [mm])
  • Manual airblast
  • Tool cooling - 7 or 17 (bar)
  • Fixed tailstock centre Mo5
  • Machine condition signalling

Machine basic concept

skelet_EN

rozmery stroje_1

Workspace

prac prostor1_en_1

 prac prostor2_en

prac prostor3_en

prac prostor4_en

Technological possibilities

technologicke moznosti_en

Spindle

vreteno_en

 

KL 435_EN

CONTACT US:

OR WRITE US:

By clicking on “Send”, I expressly agree to the processing and keeping of all my personal data I provide through KOVOSVIT MAS, a.s. in accordance with Act No. 101/2000 Coll., as amended. I provide this information to KOVOSVIT MAS, a.s., as a personal data administrator or as its authorized representative, for the sole purpose of providing information no later than three years after they have been sent.


* Required fields